roberto wrote:

>witam
>wróce do tematu dlaczego tak sie dzieje ze po uaktualnieniu systemu swaretem
>nie odpala mie sie kde
>mam slaka 10 na kernelu 2.4.*
>w załączeniu przesyłam logi
>prosze o pomoc
>jakby ktos podpowiedział mi jak to naprawic to bede wdzieczny.
>tx
>w swarecie byla to komenda:
>swaret --update && swaret --upgrade -a
>
>
>------------------------------------------------------------------------
>
>_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
>_XSERVTransOpen: transport open failed for inet6/roberto:0
>_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
>
>X Window System Version 6.8.1
>Release Date: 17 September 2004
>X Protocol Version 11, Revision 0, Release 6.8.1
>Build Operating System: Linux 2.4.27 i686 [ELF]
>Current Operating System: Linux roberto 2.4.26 #6 Mon Jun 14 19:07:27 PDT 2004 i686
>Build Date: 18 October 2004
> Before reporting problems, check http://wiki.X.Org
> to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 5 11:44:11 2005
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) ServerLayout "Simple Layout"
>(**) |-->Screen "Screen 1" (0)
>(**) | |-->Monitor "NEC FE991sb"
>(**) | |-->Device "Screen 1"
>(**) |-->Input Device "Mouse1"
>(**) |-->Input Device "Keyboard1"
>(==) Keyboard: CustomKeycode disabled
>(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo".
> Entry deleted from font path.
> (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo").
>(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/CID,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/local/share/fonts,/usr/X11R6/lib/X11/fonts,/usr/X11R6/lib/X11/fonts/TTF"
>(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
>(==) ModulePath set to "/usr/X11R6/lib/modules"
>(II) Open APM successful
>(II) Module ABI versions:
> X.Org ANSI C Emulation: 0.2
> X.Org Video Driver: 0.7
> X.Org XInput driver : 0.4
> X.Org Server Extension : 0.2
> X.Org Font Renderer : 0.4
>(II) Loader running on linux
>(II) LoadModule: "bitmap"
>(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
>(II) Module bitmap: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
>(II) Loading font Bitmap
>(II) LoadModule: "pcidata"
>(II) Loading /usr/X11R6/lib/modules/libpcidata.a
>(II) Module pcidata: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
>(--) using VT number 7
>
>(II) PCI: Probing config type using method 1
>(II) PCI: Config type is 1
>(II) PCI: stages = 0x03, oldVal1 = 0x8000002c, mode1Res1 = 0x80000000
>(II) PCI: PCI scan (all values are in hex)
>(II) PCI: 00:00:0: chip 8086,1a30 card 1043,8088 rev 11 class 06,00,00 hdr 00
>(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 11 class 06,04,00 hdr 01
>(II) PCI: 00:1d:0: chip 8086,24c2 card 1043,8089 rev 01 class 0c,03,00 hdr 80
>(II) PCI: 00:1d:1: chip 8086,24c4 card 1043,8089 rev 01 class 0c,03,00 hdr 00
>(II) PCI: 00:1d:2: chip 8086,24c7 card 1043,8089 rev 01 class 0c,03,00 hdr 00
>(II) PCI: 00:1d:7: chip 8086,24cd card 1043,8089 rev 01 class 0c,03,20 hdr 00
>(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 81 class 06,04,00 hdr 01
>(II) PCI: 00:1f:0: chip 8086,24c0 card 0000,0000 rev 01 class 06,01,00 hdr 80
>(II) PCI: 00:1f:1: chip 8086,24cb card 1043,8089 rev 01 class 01,01,8a hdr 00
>(II) PCI: 00:1f:3: chip 8086,24c3 card 1043,8089 rev 01 class 0c,05,00 hdr 00
>(II) PCI: 01:00:0: chip 10de,0201 card 0000,0000 rev a3 class 03,00,00 hdr 00
>(II) PCI: 02:03:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00
>(II) PCI: 02:0a:0: chip 13d0,2103 card 13d0,2103 rev 02 class 02,80,00 hdr 00
>(II) PCI: 02:0d:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr 00
>(II) PCI: End of PCI scan
>(II) Host-to-PCI bridge:
>(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
>(II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
>(II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
>(II) Bus 1 non-prefetchable memory range:
> [0] -1 0 0xe6000000 - 0xe76fffff (0x1700000) MX[B]
>(II) Bus 1 prefetchable memory range:
> [0] -1 0 0xe7700000 - 0xefffffff (0x8900000) MX[B]
>(II) PCI-to-PCI bridge:
>(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
>(II) Bus 2 I/O range:
> [0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
> [1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
> [2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
>(II) Bus 2 non-prefetchable memory range:
> [0] -1 0 0xe4800000 - 0xe57fffff (0x1000000) MX[B]
>(II) PCI-to-ISA bridge:
>(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
>(--) PCI:*(1:0:0) nVidia Corporation NV20 [GeForce3 Ti 200] rev 163, Mem @ 0xe6000000/24, 0xe8000000/27, 0xe7800000/19, BIOS @ 0xe77f0000/16
>(II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
>(II) Active PCI resource ranges:
> [0] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
> [1] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
> [2] -1 0 0x18000000 - 0x180003ff (0x400) MX[B]
> [3] -1 0 0xe5800000 - 0xe58003ff (0x400) MX[B]
> [4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
> [5] -1 0 0xe77f0000 - 0xe77fffff (0x10000) MX[B](B)
> [6] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
> [7] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [8] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
> [9] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
> [10] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
> [11] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [12] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
>(II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
> [1] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
> [2] -1 0 0x18000000 - 0x180003ff (0x400) MX[B]
> [3] -1 0 0xe5800000 - 0xe58003ff (0x400) MX[B]
> [4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
> [5] -1 0 0xe77f0000 - 0xe77fffff (0x10000) MX[B](B)
> [6] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
> [7] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [8] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
> [9] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
> [10] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
> [11] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [12] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [13] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
>(II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x17ffffff (0x17f00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
>(II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x17ffffff (0x17f00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
> [6] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
> [7] -1 0 0x18000000 - 0x180003ff (0x400) MX[B]
> [8] -1 0 0xe5800000 - 0xe58003ff (0x400) MX[B]
> [9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
> [10] -1 0 0xe77f0000 - 0xe77fffff (0x10000) MX[B](B)
> [11] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
> [12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [13] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [16] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
> [17] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
> [18] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [19] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> [21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
>(II) LoadModule: "dbe"
>(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
>(II) Module dbe: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "extmod"
>(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
>(II) Module extmod: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.2
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "type1"
>(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
>(II) Module type1: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.2
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
>(II) Loading font Type1
>(II) Loading font CID
>(II) LoadModule: "freetype"
>(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
> compiled for 6.8.1, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.4
>(II) Loading font FreeType
>(II) LoadModule: "speedo"
>(WW) Warning, couldn't open module speedo
>(II) UnloadModule: "speedo"
>(EE) Failed to load module "speedo" (module does not exist, 0)
>(II) LoadModule: "glx"
>(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
>(II) Module glx: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
>(II) Loading sub module "GLcore"
>(II) LoadModule: "GLcore"
>(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
>(II) Module GLcore: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
>(II) Loading extension GLX
>(II) LoadModule: "nv"
>(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
>(II) Module nv: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 0.7
>(II) LoadModule: "mouse"
>(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
>(II) Module mouse: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 0.4
>(II) LoadModule: "Keyboard"
>(WW) Warning, couldn't open module Keyboard
>(II) UnloadModule: "Keyboard"
>(EE) Failed to load module "Keyboard" (module does not exist, 0)
>(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
> Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
> Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
> GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
> GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
> Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
> GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
> GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
> GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
> GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
> GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
> Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
> GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
> GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
> 0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
> Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
> GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
> Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
> GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
> GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
> 0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
> Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
> GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
> GeForce FX Go5200, GeForce FX Go5250, GeForce FX Go5200 32M/64M,
> 0x0329, Quadro NVS 280 PCI, Quadro FX 500, GeForce FX Go5300,
> GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
> GeForce FX 5900XT, GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000,
> GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
> GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
> 0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
>(II) Primary Device is: PCI 01:00:0
>(--) Assigning device section with no busID to primary device
>(--) Chipset GeForce3 Ti 200 found
>(II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x17ffffff (0x17f00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
> [6] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
> [7] -1 0 0x18000000 - 0x180003ff (0x400) MX[B]
> [8] -1 0 0xe5800000 - 0xe58003ff (0x400) MX[B]
> [9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
> [10] -1 0 0xe77f0000 - 0xe77fffff (0x10000) MX[B](B)
> [11] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
> [12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [13] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
> [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [16] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
> [17] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
> [18] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [19] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [20] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> [21] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
>(II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x17ffffff (0x17f00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
> [6] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
> [7] -1 0 0x18000000 - 0x180003ff (0x400) MX[B]
> [8] -1 0 0xe5800000 - 0xe58003ff (0x400) MX[B]
> [9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
> [10] -1 0 0xe77f0000 - 0xe77fffff (0x10000) MX[B](B)
> [11] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
> [12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [13] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
> [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [19] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
> [20] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
> [21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [22] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> [24] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [25] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [26] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Setting vga for screen 0.
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
>(II) Module int10: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
>(II) NV(0): Initializing int10
>(II) NV(0): Primary V_BIOS segment is: 0xc000
>(--) NV(0): Chipset: "GeForce3 Ti 200"
>(**) NV(0): Depth 24, (--) framebuffer bpp 32
>(==) NV(0): RGB weight 888
>(==) NV(0): Default visual is TrueColor
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/X11R6/lib/modules/libvgahw.a
>(II) Module vgahw: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.7
>(==) NV(0): Using HW cursor
>(--) NV(0): Linear framebuffer at 0xE8000000
>(--) NV(0): MMIO registers at 0xE6000000
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Loading /usr/X11R6/lib/modules/libi2c.a
>(II) Module i2c: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.2.0
> ABI class: X.Org Video Driver, version 0.7
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Loading /usr/X11R6/lib/modules/libddc.a
>(II) Module ddc: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> ABI class: X.Org Video Driver, version 0.7
>(II) NV(0): I2C bus "DDC" initialized.
>(II) NV(0): Probing for EDID on I2C bus A...
>(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
>(II) NV(0): I2C device "DDC:ddc2" removed.
>(--) NV(0): DDC detected a CRT:
>(II) NV(0): Manufacturer: NEC Model: 61d8 Serial#: 16843009
>(II) NV(0): Year: 2002 Week: 44
>(II) NV(0): EDID Version: 1.3
>(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
>(II) NV(0): Sync: Separate Composite
>(II) NV(0): Max H-Image Size [cm]: horiz.: 37 vert.: 27
>(II) NV(0): Gamma: 2.20
>(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
>(II) NV(0): First detailed timing is preferred mode
>(II) NV(0): GTF timings supported
>(II) NV(0): redX: 0.626 redY: 0.339 greenX: 0.279 greenY: 0.600
>(II) NV(0): blueX: 0.149 blueY: 0.072 whiteX: 0.283 whiteY: 0.297
>(II) NV(0): Supported VESA Video Modes:
>(II) NV(0): 720x400@70Hz
>(II) NV(0): 720x400@88Hz
>(II) NV(0): 640x480@60Hz
>(II) NV(0): 640x480@67Hz
>(II) NV(0): 640x480@72Hz
>(II) NV(0): 640x480@75Hz
>(II) NV(0): 800x600@56Hz
>(II) NV(0): 800x600@60Hz
>(II) NV(0): 800x600@72Hz
>(II) NV(0): 800x600@75Hz
>(II) NV(0): 832x624@75Hz
>(II) NV(0): 1024x768@87Hz (interlaced)
>(II) NV(0): 1024x768@60Hz
>(II) NV(0): 1024x768@70Hz
>(II) NV(0): 1024x768@75Hz
>(II) NV(0): 1280x1024@75Hz
>(II) NV(0): 1152x870@75Hz
>(II) NV(0): Manufacturer's mask: 0
>(II) NV(0): Supported Future Video Modes:
>(II) NV(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
>(II) NV(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
>(II) NV(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
>(II) NV(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
>(II) NV(0): #4: hsize: 1280 vsize 960 refresh: 85 vid: 22913
>(II) NV(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
>(II) NV(0): #6: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
>(II) NV(0): #7: hsize: 1792 vsize 1344 refresh: 65 vid: 17857
>(II) NV(0): Supported additional Video Mode:
>(II) NV(0): clock: 157.5 MHz Image Size: 356 x 266 mm
>(II) NV(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
>(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
>(II) NV(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 230 MHz
>(II) NV(0): Monitor name: NEC FE991SB
>(II) NV(0): Serial No: 2Y00004YB
>(II) NV(0): Using CRT on CRTC 0
>(--) NV(0): VideoRAM: 131072 kBytes
>(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>(WW) NV(0): config file hsync range 40-120kHz not within DDC hsync ranges.
>(II) NV(0): NEC FE991sb: Using hsync range of 40.00-120.00 kHz
>(II) NV(0): NEC FE991sb: Using vrefresh range of 50.00-100.00 Hz
>(II) NV(0): Clock range: 12.00 to 350.00 MHz
>(II) NV(0): Not using default mode "640x350" (hsync out of range)
>(II) NV(0): Not using default mode "320x175" (hsync out of range)
>(II) NV(0): Not using default mode "640x400" (hsync out of range)
>(II) NV(0): Not using default mode "320x200" (hsync out of range)
>(II) NV(0): Not using default mode "720x400" (hsync out of range)
>(II) NV(0): Not using default mode "360x200" (hsync out of range)
>(II) NV(0): Not using default mode "640x480" (hsync out of range)
>(II) NV(0): Not using default mode "320x240" (hsync out of range)
>(II) NV(0): Not using default mode "640x480" (hsync out of range)
>(II) NV(0): Not using default mode "320x240" (hsync out of range)
>(II) NV(0): Not using default mode "640x480" (hsync out of range)
>(II) NV(0): Not using default mode "320x240" (hsync out of range)
>(II) NV(0): Not using default mode "800x600" (hsync out of range)
>(II) NV(0): Not using default mode "400x300" (hsync out of range)
>(II) NV(0): Not using default mode "800x600" (hsync out of range)
>(II) NV(0): Not using default mode "400x300" (hsync out of range)
>(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(WW) (1792x1344,NEC FE991sb) mode clock 261MHz exceeds DDC maximum 230MHz
>(WW) (1856x1392,NEC FE991sb) mode clock 288MHz exceeds DDC maximum 230MHz
>(WW) (1920x1440,NEC FE991sb) mode clock 234MHz exceeds DDC maximum 230MHz
>(WW) (1920x1440,NEC FE991sb) mode clock 297MHz exceeds DDC maximum 230MHz
>(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
>(II) NV(0): Not using default mode "960x720" (hsync out of range)
>(WW) (2048x1536,NEC FE991sb) mode clock 266.95MHz exceeds DDC maximum 230MHz
>(WW) (2048x1536,NEC FE991sb) mode clock 340.48MHz exceeds DDC maximum 230MHz
>(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
>(II) NV(0): Not using default mode "1024x768" (hsync out of range)
>(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
>(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
>(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
>(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
>(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
>(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
>(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
>(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
>(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
>(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
>(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
>(**) NV(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
>(II) NV(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
>(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
>(II) NV(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
>(**) NV(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
>(II) NV(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync
>(**) NV(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
>(II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
>(**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
>(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
>(**) NV(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
>(II) NV(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
>(**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
>(II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
>(**) NV(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
>(II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
>(**) NV(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
>(II) NV(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
>(**) NV(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
>(II) NV(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
>(**) NV(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
>(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
>(**) NV(0): Default mode "1024x768": 170.2 MHz, 120.2 kHz, 75.0 Hz (D)
>(II) NV(0): Modeline "1024x768" 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync
>(**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
>(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
>(**) NV(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "1024x768" 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync
>(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
>(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
>(**) NV(0): Default mode "960x720": 148.5 MHz, 112.5 kHz, 75.0 Hz (D)
>(II) NV(0): Modeline "960x720" 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync
>(**) NV(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync
>(**) NV(0): Default mode "928x696": 144.0 MHz, 112.5 kHz, 75.0 Hz (D)
>(II) NV(0): Modeline "928x696" 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync
>(**) NV(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
>(II) NV(0): Modeline "928x696" 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync
>(**) NV(0): Default mode "896x672": 130.5 MHz, 106.3 kHz, 75.0 Hz (D)
>(II) NV(0): Modeline "896x672" 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync
>(**) NV(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync
>(**) NV(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
>(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
>(**) NV(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
>(II) NV(0): Modeline "800x600" 114.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
>(**) NV(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
>(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
>(**) NV(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
>(II) NV(0): Modeline "800x600" 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
>(**) NV(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
>(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
>(**) NV(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
>(II) NV(0): Modeline "800x600" 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
>(**) NV(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
>(II) NV(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
>(**) NV(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
>(**) NV(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
>(II) NV(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
>(**) NV(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
>(**) NV(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
>(II) NV(0): Modeline "640x512" 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync
>(**) NV(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
>(II) NV(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
>(**) NV(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
>(**) NV(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
>(II) NV(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
>(**) NV(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
>(**) NV(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
>(II) NV(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
>(**) NV(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
>(II) NV(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
>(**) NV(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
>(II) NV(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
>(**) NV(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
>(II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
>(**) NV(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
>(II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
>(**) NV(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
>(II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
>(**) NV(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
>(II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
>(**) NV(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
>(II) NV(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
>(**) NV(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
>(II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
>(**) NV(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
>(II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
>(**) NV(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
>(II) NV(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
>(--) NV(0): Display dimensions: (370, 270) mm
>(--) NV(0): DPI set to (87, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/X11R6/lib/modules/libfb.a
>(II) Module fb: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.2
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>(II) Loading /usr/X11R6/lib/modules/libxaa.a
>(II) Module xaa: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 1.2.0
> ABI class: X.Org Video Driver, version 0.7
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Loading /usr/X11R6/lib/modules/libramdac.a
>(II) Module ramdac: vendor="X.Org Foundation"
> compiled for 6.8.1, module version = 0.1.0
> ABI class: X.Org Video Driver, version 0.7
>(--) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC? No, I don't.
>(II) resource ranges after preInit:
> [0] 0 0 0xe7800000 - 0xe787ffff (0x80000) MX[B]
> [1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
> [2] 0 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B]
> [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [4] -1 0 0x00100000 - 0x17ffffff (0x17f00000) MX[B]E(B)
> [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [8] -1 0 0xe4800000 - 0xe48000ff (0x100) MX[B]
> [9] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
> [10] -1 0 0x18000000 - 0x180003ff (0x400) MX[B]
> [11] -1 0 0xe5800000 - 0xe58003ff (0x400) MX[B]
> [12] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
> [13] -1 0 0xe77f0000 - 0xe77fffff (0x10000) MX[B](B)
> [14] -1 0 0xe7800000 - 0xe787ffff (0x80000) MX[B](B)
> [15] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
> [16] -1 0 0xe6000000 - 0xe6ffffff (0x1000000) MX[B](B)
> [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [22] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
> [23] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
> [24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [25] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> [26] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> [27] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [28] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [29] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
> [30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(==) NV(0): Write-combining range (0xe8000000,0x8000000)
>(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> Indirect CPU to Screen color expansion
> Solid Lines
> Scanline Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 32 128x128 slots
> 32 256x256 slots
> 16 512x512 slots
>(==) NV(0): Backing store disabled
>(==) NV(0): Silken mouse enabled
>(==) RandR enabled
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension LBX
>(II) Initializing built-in extension XC-APPGROUP
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension XFree86-Bigfont
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) Initializing built-in extension XEVIE
>(**) Option "Protocol" "IMPS/2"
>(**) Mouse1: Device: "/dev/mouse"
>(**) Mouse1: Protocol: "IMPS/2"
>(**) Option "CorePointer"
>(**) Mouse1: Core Pointer
>(**) Option "Device" "/dev/mouse"
>(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
>(**) Option "ZAxisMapping" "4 5"
>(**) Mouse1: ZAxisMapping: buttons 4 and 5
>(**) Mouse1: Buttons: 5
>(EE) No Input driver matching `Keyboard'
>(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
>(II) Mouse1: ps2EnableDataReporting: succeeded
>No core keyboard
>
>Fatal server error:
>failed to initialize core devices
>
>Please consult the The X.Org Foundation support
> at http://wiki.X.Org
> for help.
>Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>
>
>
przede wszystkim to nie mozesz zaladowac modolow: speedo i keyboard.

tutaj jest to opisane:

http://www.linuxquestions.org/questions/history/269379

http://www.linuxquestions.org/questions/history/254781

... i pamietaj Google nie gryzie ]:->

-pozdr.-
Received on Wed Jan 5 13:04:44 2005